WhatsApp: +86-15652116876 E-mail: jcx@jcxcnc.com Tel: +86-1065568853
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
JCXLaser-A3
JCXStone
A3 Photoceramic Printer
Samples :
Product Advantages :
Our printers are retrofitted with higher resolution to print sharp images.
The printer can print, copy and scan.
The printed photos are specially treated to never fade.
We have a complete set of printing equipment that can solve your problems.
Four-color ceramic toner for color photos.
Product Instructions :
Customers provide photos, we use photoshop software to beautify the photos, and set the size we need.
Connect the computer to the printer, put the printing paper and print the photos in the printer.
Cover the surface of the printed photo with a layer of varnish, and use a hair dryer to air dry the oil on the surface.
Use scissors to cut the photo out of the same shape and size as the ceramic piece, prepare a pot of room temperature water, soak the cut photo in room temperature water for 8-9 seconds, transfer the picture to the ceramic piece, take a scraper and scrape it lightly Drain the water and then re-scrape it. Squeeze the scraper into an arc to scrape off the water. After scraping, blow it with a hair dryer until the back of the tile is hot to the touch (To prevent the image from being blurred after being rubbed).
Put the ceramic memorial photos into the oven for high temperature baking, the best temperature is 870 degrees Celsius (1598 degrees Fahrenheit), and the photos will be baked in about 30-45 minutes. Before heating up, put the ceramic memorial photo in and press the red button to start the heating. The cover is naturally closed at 400 degrees Celsius , and the lid is closed after 400 degrees Celsius . After the automatic jump stop, the temperature is naturally lowered, and the lid can be fully opened after 185 degrees Celsius .
Supporting products :
Frequently Asked Questions By Customers :
Which printer prints better / which printer is recommended? – Recommended Fuji2, Fuji2 is our best-selling printer with the highest resolution and value for money.
How many photos can a set of ceramic toner print? – 800 sheets
The temperature at which the photo was baked in a high-temperature oven? – The optimum temperature is 870 degrees Celsius, or 1598 degrees Fahrenheit.
Service Advantages :
24 hours technical support by email or phone.
The seller provides maintenance and all spare parts of the machine within one year warranty.
Under the Normal working condition, the whole machine is in the guarantee.
Company Introduction :
Beijing Yandiao CNC Machine Company, mainly engaged in the design, research, and production of CNC machines since 2010. Factory, over 8000² workshops, with more than 80 working people, is located in Jinan city, Shangdong province.Focus on providing solutions for the cnc machine industry. We have our own machining workshop. All machines frame, gantry, and Z-axis are made in our own workshop. In this way, we can ensure our good quality and lower the cost.We can design and produce according to customers' requirements. (including machine structure, type, color, spare parts, and so on ).We can make OEM. ( with customers' own logo on the machine )
We have rich experience in exporting, and we will prepare well all customs documents and CO for making customs successfully.
A3 Photoceramic Printer
Samples :
Product Advantages :
Our printers are retrofitted with higher resolution to print sharp images.
The printer can print, copy and scan.
The printed photos are specially treated to never fade.
We have a complete set of printing equipment that can solve your problems.
Four-color ceramic toner for color photos.
Product Instructions :
Customers provide photos, we use photoshop software to beautify the photos, and set the size we need.
Connect the computer to the printer, put the printing paper and print the photos in the printer.
Cover the surface of the printed photo with a layer of varnish, and use a hair dryer to air dry the oil on the surface.
Use scissors to cut the photo out of the same shape and size as the ceramic piece, prepare a pot of room temperature water, soak the cut photo in room temperature water for 8-9 seconds, transfer the picture to the ceramic piece, take a scraper and scrape it lightly Drain the water and then re-scrape it. Squeeze the scraper into an arc to scrape off the water. After scraping, blow it with a hair dryer until the back of the tile is hot to the touch (To prevent the image from being blurred after being rubbed).
Put the ceramic memorial photos into the oven for high temperature baking, the best temperature is 870 degrees Celsius (1598 degrees Fahrenheit), and the photos will be baked in about 30-45 minutes. Before heating up, put the ceramic memorial photo in and press the red button to start the heating. The cover is naturally closed at 400 degrees Celsius , and the lid is closed after 400 degrees Celsius . After the automatic jump stop, the temperature is naturally lowered, and the lid can be fully opened after 185 degrees Celsius .
Supporting products :
Frequently Asked Questions By Customers :
Which printer prints better / which printer is recommended? – Recommended Fuji2, Fuji2 is our best-selling printer with the highest resolution and value for money.
How many photos can a set of ceramic toner print? – 800 sheets
The temperature at which the photo was baked in a high-temperature oven? – The optimum temperature is 870 degrees Celsius, or 1598 degrees Fahrenheit.
Service Advantages :
24 hours technical support by email or phone.
The seller provides maintenance and all spare parts of the machine within one year warranty.
Under the Normal working condition, the whole machine is in the guarantee.
Company Introduction :
Beijing Yandiao CNC Machine Company, mainly engaged in the design, research, and production of CNC machines since 2010. Factory, over 8000² workshops, with more than 80 working people, is located in Jinan city, Shangdong province.Focus on providing solutions for the cnc machine industry. We have our own machining workshop. All machines frame, gantry, and Z-axis are made in our own workshop. In this way, we can ensure our good quality and lower the cost.We can design and produce according to customers' requirements. (including machine structure, type, color, spare parts, and so on ).We can make OEM. ( with customers' own logo on the machine )
We have rich experience in exporting, and we will prepare well all customs documents and CO for making customs successfully.