The advertising decoration industry has taken a new development direction from the computer engraving machine and computer inkjet printer-advertising decoration engraving machine has gradually become popular in the market. The following points should be paid attention to when choosing an engraving machine:
1. Classification of advertising engraving machines: Computer engraving machines are divided into two categories: low-power engraving machines and high-power engraving machines. The low-power engraving machine refers to the engraving machine with a small engraving motor power (generally below 800w). Because of its small engraving motor power, it can only be used for fine processing with less cutting surface at a time. For example: badges, sand table models, surface processing of handicrafts, etc. This type of engraving machine cannot perform high-power engraving and cutting. High-power engraving machine refers to an engraving machine with an engraving motor power above 800W. This type of engraving machine can not only carry out low-power engraving, but also high-power engraving. For example: the production of acrylic characters, all kinds of advertising signs, irregular cutting and forming of PVC sheets, FDM processing, etc. Because of its high power, it can cut 30mm thick plexiglass at a time or use a forming knife for high-power forming and engraving. Some users are not clear about the distinction between high-power and low-power engraving machines. After watching the demonstration of high-power engraving machines, because of investment difficulties, they bought a lower-priced low-power engraving machine. As a result, it was only possible to engrave a breastplate of less than two yuan per piece (only a few dimes in some areas), and for high-power engraving such as plexiglass signs, one could only watch others do it. With the same investment, the same store cost, the same operation and other staff salaries, 80% of the engraving business cannot be done. This not only reduces their own benefits, but also is in a very disadvantageous position in the competition of the same industry. This point must be paid attention to when choosing an engraving machine. If you are applying in this industry, you must buy an engraving machine that can perform high-power engraving.
2. Carefully observe the operation demonstration of the engraving machine: the precision of the engraving machine can be seen from the engraving of small characters, and the application range of the engraving machine can be seen from the high-power engraving. If the precision of the engraving machine is very poor, the edges will be rough when engraving with high power; if there is severe resonance (vibration) during high-power engraving, the accuracy of the engraving machine will be greatly reduced. If the engraving machine cannot perform high-power engraving, the application range of the engraving machine will be greatly reduced. Therefore, according to the demonstration of the engraving machine, determine the application scope of the engraving machine, that is, the scope of your engraving business. The application scope of the engraving machine directly determines whether it can bring you economic benefits.
Third, the application of engraving machine consumables and software: engraving machine consumables should be very low, general engraving machine should be able to use ordinary lathe processing tools, the price is only a dozen yuan. However, some engraving machines all use special knives, which greatly increases the cost of consumables. The application of software is also very important. Some brands of engraving machine software is not fully functional, and this engraving machine cannot use other software. Other brands of engraving machines can apply various common software, as long as there is new software or a software has new function upgrades, these new technologies can immediately create benefits for you.
